Emblaze-VCON VCB5 Betriebsanweisung PDF herunterladen (Seite 21)

4 Setting Up the VCB

Emblaze-VCON VCB5 User’s Guide 13

4SETTING UP THE VCB

This chapter provides instructions for setting the VCB configuration in the VCB

Configuration program, and describes the properties so that you can set up the most

suitable configuration for your installation.

4.1 VCB Settings

The

Settings

tab contains general device configuration. These appear under the

MCU Settings and Administrators categories.

MCU Settings

³ To display MCU Settings

1 After logging in, click the

Settings

tab and then

MCU Settings

2 On this page, you can edit the parameters listed below. The other

parameters are read-only and cannot be edited in the VCB Configuration

program (for descriptions, see page 14).

Description Identity of the VCB. This name will appear in the MXM

Administrator after the login process is finished.

Location Physical location of the VCB.

Gatekeeper

Address

IP address of the MXM or H.323 gatekeeper.

Defaults Click to restore the default port configuration.

RTP Ports

Start At

The lowest port number allocated for video and audio

during videoconferences.

This allocation meets the Real-Time Protocol (RTP) and

Real-Time Control Protocol (RTCP) specifications,

which enable applications to synchronize and spool

audio and video information.

H.245 Port

Range

The lowest port number allowed for end-to-end

signalling of multimedia during videoconferences

This allocation provides for H.245 functions, such as

capability exchange, signalling of commands and

indications, and messages to open and fully describe the

content of logical channels.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Keine Kommentare

Emblaze-VCON VCB5 Betriebsanweisung Seite 21